On September 12, 2026, HNYT loaded and dispatched two ZWY80 crawler mucking loaders for a copper mine in South America. The machines will support mine roadway excavation and ore loading, gathering loose material at the working face and transferring it to the mine’s haulage equipment. This shipment pairs a crawler chassis with a digging arm and scraper-chain conveyor for underground muck handling. Factory photographs document the equipment during truck loading.

Equipment and Configuration

Model and quantity: ZWY80 crawler mucking loader; 2 units

Destination and duties: South American copper mine; roadway excavation support and ore loading

Visible configuration: Crawler undercarriage, hydraulic digging arm and scraper-chain conveyor

Published model capacity: Up to 80 m³/h

Published model weight: 6,800 ± 200 kg

Published main motor power: 2 × 15 kW

The numerical values above are standard model references from the ZWY80 product page. Actual output depends on material and operating conditions; order-specific specifications govern the supplied equipment.

View the official ZWY80 product page

Factory Loading and Dispatch

The loading photographs show the ZWY80 positioned on a truck inside the factory workshop. At the front, the digging arm is folded inward and the bucket sits above the receiving section. The crawler tracks rest on the truck bed, while the body panels and side operating position remain clearly visible. A factory worker is present at the machine during loading.

The view from the opposite side shows the relationship between the crawler chassis, the front gathering area and the conveyor extending toward the rear. These views give the customer a practical reference for the machine’s layout as it leaves the factory, including the position of the digging assembly relative to the loading deck.

A rear photograph provides a closer view of the conveyor discharge end, where the chain and scraper components are visible. Together, the three images document the truck-loading stage of the two-unit order and show the principal assemblies that will handle material at the copper mine.

Supporting Copper Mine Roadway Development

For this copper mine, the intended work connects roadway excavation with ore loading. The digging arm gathers loose rock and ore into the receiving section, and the conveyor carries the material toward the discharge point. Combining these actions helps organize material transfer from the working face to the receiving vehicle during mine development.

A crawler tunnel muck loader is relevant where traction and positioning on uneven mine floors matter. The scraper-chain arrangement also suits the handling of coarse broken material. To turn that capability into productive loading, the receiving trucks or mine cars must match the conveyor’s discharge height and reach, with enough haulage availability to keep material moving.

For buyers comparing similar equipment, tunnel clearance, gradient, rock size and electrical supply are key selection inputs. HNYT’s underground mucking loader selection guide explains how these conditions affect machine choice.

Related Product and Project Information

ZWY80 crawler mucking loader specifications

Crawler mucking loader range

ZWY120 crawler mucking loader shipment to an iron mine

Request a Configuration and Quotation

Looking for an underground mucking loader manufacturer for your copper mine or tunnel project? Send your required quantity, tunnel width and height, maximum gradient, material size, loading target, receiving vehicle dimensions and site voltage/frequency to export@ytequipment.net for a suitable configuration and quotation.