Wheeled and chargeuses à chenilles suit different tunnel conditions: wheels are a practical option on firm, relatively level floors, while crawlers deserve closer consideration where loose, wet or uneven ground increases traction demands. Choose between them by checking the actual route, working space and loading arrangement.

What both types do

Both designs combine a hydraulic digging arm with a conveyor to gather material and discharge it into receiving haulage equipment. The undercarriage changes how the machine travels, but conveyor type, discharge geometry and available space still need to match the job. Wheels or tracks alone do not determine the complete loading configuration.

Compare ground conditions and movement

When to consider wheeled mucking loaders

Start by considering chargeuses à pneus where the floor is firm and relatively level. If the machine must move between headings, review the travel route and repositioning requirements alongside the loading task. Compare the quoted model specifications rather than assuming every wheeled machine has the same travel speed.

When to consider crawler mucking loaders

Consider chargeuses à chenilles where loose, wet or uneven ground makes traction a priority. Tracks can be useful in these conditions, but the crawler label does not establish suitability for every slope. Check the proposed machine against the ground, gradient and operating arrangement at your site.

Check the gradient for the specific configuration

Provide the steepest gradient along the route, together with floor condition and operating direction. Review traction and braking for the selected model. A climbing figure should not be treated as a universal working limit for all machines in the same category.

Also confirm whether the proposed machine uses a belt or scraper-chain conveyor. The chassis and conveying arrangement need to be reviewed together when selecting equipment for an inclined heading.

Confirm clearance and the loading connection

Measure the narrowest clear tunnel width and height after allowing for ducts, pipes and cables. Include bends and space for the digging arm and conveyor. A machine that fits while parked may still need additional room to turn or load.

Match conveyor discharge height and reach to the receiving truck, mine car or downstream conveyor. Check the largest rock size and required output against the proposed conveying system. Loading capacity is only useful when the receiving haulage can keep up.

For a fuller checklist covering tunnel dimensions, material and power supply, see our underground mucking loader selection guide.

Compare maintenance and quotation scope

Include tires and axles when reviewing a wheeled machine, and tracks and undercarriage components when reviewing a crawler. Both also need attention to the hydraulic system and conveyor. Compare the maintenance requirements and parts supply for the actual models before drawing conclusions about ownership cost.

Ask for quotations based on the same material, required output, discharge arrangement and electrical supply. Confirm any site-specific safety requirements with the supplier. A price comparison is meaningful only when the offered configurations address the same job.

Frequently asked questions

Are wheeled mucking loaders always the lower-cost choice

Compare quotations, maintenance requirements and parts supply for the proposed models. The undercarriage type alone is not enough to establish total ownership cost.

Does choosing tracks confirm suitability for a slope

No. The maximum route gradient, floor condition, braking and conveyor configuration still need review for the specific machine.

What information should I send for selection

Send clear tunnel dimensions, bends, maximum gradient, floor condition, material and largest rock size, required output, receiving vehicle dimensions and site power supply.

Discuss your tunnel requirements

To compare mucking loaders for your project, contact HNYT with your tunnel measurements, ground conditions and loading requirements. These details provide a practical basis for reviewing a wheeled or crawler configuration.

Recent Posts

Tag Clouds

Nous contacter

HNYT EQUIPMENT

Nous pouvons fournir une vidéo en direct pour montrer notre usine ! Veuillez nous envoyer directement votre demande à notre adresse électronique ou nous contacter par Whatsapp.

Add : No. 48, Liancheng avenue, Jiuhua Industrial Park, Jiuhua Economic Zone, Xiangtan City, Hunan, P.R,China

Téléphone:86 17369222201

 

Suivez-nous

Copyright @ 2024 HNYT EQUIPMENT Tous droits réservés.

fr_FRFrench